Charge the Batteries | Hand Held Products 7900 instruction

Step 2: Charge the Batteries

There are two types of battery power: the main battery pack and the backup battery located inside the terminal. The main battery pack powers the terminal and charges the internal backup battery.

Dolphin terminals ship with both batteries discharged of power. Charge the main battery pack for a minimum of four hours before initial use!

!provided by Hand Held Products. Use of peripherals or cables not sold/manufactured by Hand Held Products will void the warranty and may damage the terminal.Use a Dolphin 7900 peripheral and the power cables

See page 5 for a complete list of Dolphin peripherals.

Note: Additional charge time is required to fully charge the internal backup battery the first time.

Step 3: Initialize the Dolphin Terminal

Dolphin HomeBase

Note: Do NOT press any keys while the terminal is initializing!

1.Apply power to the Dolphin terminal. The screen turns white and the LEDs flash as the system performs a hard reset.

2.The kernel splash screen displays for a few seconds. The Build numbers indicate software version numbers for the operating system.

Kernel

Bootloader

Build 8.XX 8.XX 8.XX Keyboard

3.When the Windows Mobile splash screen appears, follow the on-screen directions using the stylus provided by Hand Held Products.

Note: When aligning the screen, press firmly into the center of the cross-hair target once and release. Do not “double-tap” the target. Alignment should always be performed with a stylus designed for touch screen applications. The small point is required for accurate calibration.

4.Wait as Autoinstall begins installing programs. A status bar appears on the screen that identifies each program as it installs.

Do NOT touch the screen or the keyboard while programs are installing!

4	Dolphin® 7900 Series Mobile Computer Quick Start Guide