Acumen Pedometer manual Reset Button, Clock Settings, Milestone/Goal Beeper Functions

You can switch between each mode any time before, during and after your exercise without affecting the accuracy of JogMan.

B. Reset Button:

Press only when you want to clear your results. This is referring to the results of the Steps, Stopwatch and Average Speedmodes. If you do not press the Reset button, the unit will show where you left off from the previous exercise period.

(Note: The stride length will not be affected)

C. Clock Settings

Press & hold the Adjust button once until the hour blinks. Adjust by pressing "+" or "-" buttons. Press Adjust button for minute setting, repeat the same procedure as for the hour. Press Adjust button once more and the time is now locked in. You can display the time whenever you wish without affecting the recording of the unit.

D. Milestone/Goal Beeper Functions

The Milestone and Goal functions can be switched to work with either Time or Distance using the 3 positions slide switch in the battery compartment. To switch these functions off, put the switch in the radio position.

DIST RADIO TIME

D.1. Milestone Beeper

Once enabled, this function will beep every half-hour or half a mile to remind the user. The unit uses a series of different notes to inform the user of the progress.

2