Acumen Pedometer manual Distance settings, Goal Beeper

Page 5

A low tone indicates a full Hour/Mile (KM).

A high tone indicates a half Hour/Mile (KM).

For instance, 3 low tones and a high tone indicate the user has completed 3.5 hours or miles.

D.2. Goal Beeper

User can program a goal (either in terms of time or distance). When this goal is accomplished, the unit will sound a continuous beep for 2 seconds.

D.2.1. Time Goal Setting

Make sure the 3-positions switch is at the Radio position. Then slide it to the Time position. The time goal setting will be displayed for 3 seconds. To change the setting, hold down the Adjust button during the 3 seconds. The goal time will start to blink and can be changed by using the "+" and "-" buttons.

D.2.2. Distance Goal Setting

Make sure the 3-positions switch is at the Radio position. Then slide it to the Distance position. The distance goal setting will be displayed for 3 seconds. To change the setting, hold down the Adjust button during the 3 seconds. The goal distance will start to blink and can be changed by using the "+" and "-" buttons.

E. Distance settings :

Turn to the back of the Jogman, open the battery door. Remove the battery, you will see a slide switch, the indication is for distance setting in Km or Miles. Select the unit to your own choice as shown below.

DIST RADIO TIME

Mi

Km

3

Image 5
Contents Acumen Pedometer Contents Function Button Models & FeaturesII. Buttons & Operations Milestone/Goal Beeper Functions Reset ButtonClock Settings Goal Beeper Distance settingsIV. Begin Your Walk or RUN III. Setting Your OWN Stride LengthVI. Care and Maintenance Using the RadioVIII. Limited Warranty VII. Changing the Battery