Accusplit AE170XL Changing Units English vs. Metric, Replacing the Battery and Master Reset

CHANGING UNITS (English vs. Metric)

The Pedometer can display either in English units (in, mi, and lb

-this is the default), or in Metric units (cm, km, and kg). From within Deep Set mode (see pg. 21), press the S2 button to cycle back and forth between setting the Step Filter set point and Choice of Unit System.The unit will show either “US” or “EU” (for European Union) depending on the unit system chosen. If you change units after using the pedometer, the unit will convert all of your data into the new unit system when you exit Deep Set model.You can check to see which system of units you are using by seeing which measurement units are displayed on the Stride and Weight setting screens.

Press S3+ (MODE) or S3– (RESET) to change the Measurement Mode. Press and hold S4 for 2 seconds to exit Deep Set Mode.

Note:The unit will save any changes and exit set mode after 30

24seconds unattended.

REPLACING THE BATTERY AND MASTER RESET

When the display starts to dim or goes blank, it is time to replace the battery.

If the display is not uniformly dim or blank, and appears to display “erroneous data”, do a Master Reset by pressing all 3 buttons simultaneously for 3 seconds and then release.

The display should go blank, then turn all segments on, then display 0 steps in Step Mode.

Note: All the settings will return to their default setting values. If you need to change the battery, the settings will also revert to default settings.

25

To replace the battery:

1.Insert a coin into the slot on the bottom of the case, and twist to loosen the faceplate. Remove

faceplate and set aside.

2. Locate the battery holder as seen	Battery
on sketch. Pull out the old battery,
and push a new LR-44 battery into the holder,
with positive terminal (+) facing up.

3.Snap faceplate back into place, hooking the bottom two tabs first, then closing by pressing together at the top two tabs.

26

SPECIFICATIONS, FEATURES, and FUNCTIONS Description of Functions

•Counts Steps up to 99,999 then rollover.

•Counts distance traveled during step activity, up to

999.99 mi or km, then rollover. Automatically counts whenever step activity is occurring.

•Adjustable stride length for greater distance accuracy (default setting is 21 in/53 cm, but can be set from 12-72 in (30-180 cm), in 0.25 in / 1 cm increments.

•Counts Calories consumed during step activity, up to 9,999.9 Kcal, then rollover. Automatically counts whenever step activity is occurring.

•Uses a proprietary formula for high accuracy in Calorie

computation.27

•Adjustable Weight setting for greater Calorie accuracy (default setting is 100lbs/45 kg, but can be set from 66-400 lbs./30-180kg in 0.5 lb. / 0.5 kg increments.)

•Adjustable Step Filter (default setting is 1 step, but can be set from 0-5 steps) to increase step count accuracy.

•Switchable between English and Metric units, without losing data (default setting is English units).

28

REGISTER NOW Please return	Email (preferred)
your AE170XL Registration to	User
the Repair Center address in the
warranty, and we will let you know
about future products.

NO-PROOF-OF-PURCHASE LIMITED WARRANTY

Free service for first year of ownership;

$12 fee for service thereafter. See label inside unit for date.

See www.ACCUSPLIT.com/support for details

29

INDEX

Battery, replacing . .	25-26		Stride Length,
Current day’s results,			setting . . . . . . 11-13
viewing	.	.19	Unit of measure,
Setting Mode, exiting	.	.15	changing . . . . . . 24
Open your pedometer .		. 4	Wearing pedometer .	. .16
Safety Leash . . . .	17-18		Weight, setting . . .	14-15
Setting up pedometer	. 8-15		Warranty . . . . . . . 29
Step Filter Setting,
change	. 22-23

30

31