Impex ME-708 manual Securely tighten all Nuts and Bolts, See Diagram

Page 7

NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.

STEP 1 (See Diagram1)

A.) Do not tighten Nuts and Bolts until instructed to do so.

B.) Attach the Front Stabilizer (#2) to the Main Frame (#1). Secure it with two M8 x 2 ½”

Carriage Bolts (#15), two 7/8” Curved Washers (#16), and two M8 Acorn Nuts (#17).

C.) Attach the Rear Stabilizer (#3) to the Main Frame. Secure it with three M8 x 5/8” Allen Bolts (#18), two Ø 1” Flat Washers (#19).

D.) Securely tighten all Nuts and Bolts.

DIAGRAM 1

6

STEP 2 (See Diagram 2)

Image 7
Contents Marcy Before YOU Begin Table of ContentsPrecautions Important Safety NoticePage Hardware Pack PRE-ASSEMBLY Check ListDescription Identifier Description ’TY Assembly InstructionSecurely tighten all Nuts and Bolts See DiagramDiagram Diagram Diagram Diagram Exploded Diagram Description Quantity Parts ListDisplay Replace BatteryComputer Auto Start / StopExercise Phase Warm Up PhaseExercise Instructions Cool Down Phase Weight LossMuscle Toning Info@impex-fitness.com Impex INC