Battery Life Indicator, Battery Change

	English	BATTERY LIFE INDICATOR
		● When the second digits start flashing in the TIME/CALENDAR mode, replace the
		battery with a new one as soon as possible. Otherwise, the watch will stop
		operating in a couple of days. We suggest that you have the battery replaced by an

NECESSARY PROCEDURES AFTER CHANGING THE BATTERY

*After the battery is replaced with a new one , or in case an abnormal display (broken numerals or letters etc.) appear, follow the procedures below to reset the IC.

English

AUTHORIZED SEIKO DEALER.

* Even after the battery life indicator appears, time accuracy is not affected.

BATTERY CHANGE

The miniature battery which powers your watch should last approxi-

mately 3 years. However, because the battery is inserted at the

factory to check the function and performance of the watch, its actual

life once in your possession may be less than the specified period.

When the battery expires, be sure to replace it as soon as possible

to prevent any malfunction. For battery replacement, we recom-

mend that you contact an AUTHORIZED SEIKO DEALER and request

SEIKO SR1130W battery.

* The battery life may be less than 3 years if:

¥ the alarm is used for longer than 20 seconds a day,

¥ the stopwatch is used for longer than 3 minutes a day,

¥ the confirmation sound is used more than 10 times a day, and/or

¥ the timer is used more than once a day.

➡	C	➡
B	C
A	D	➡
➡		➡

* All digital indicators are reset to show " 1" , " SUN" and "12:00 00" in the TIME/ CALENDAR mode.

Press and hold the four buttons for 2 to 3 seconds at the same time.

➪

All digital indicators disappear at once and the display shown at left appears when the buttons are re- leased.

➪

Set the digital time/calendar and analogue time.

(See ÒTIME/CALENDAR SETTINGÓ on page 8)

English