HOW to SET the Time and Calendar

English	●	the watch after purchase.
	●	If there is any time difference between the factory default time settings and

the local time in your area, reset the time and calendar before initially using

● In a case that the watch is completely stopped due to a shortage of stored electrical energy, recharge the watch until the second hand resumes the normal one-second interval movement, and then reset the time and calen- dar. (Refer to “IF THE SECOND HAND STARTS MOVING AT TWO-SECOND INTERVALS” on page 17.)

■ HOW TO SET THE TIME

1. Pull out the crown to the second click. The second hand will be stopping on the spot.

✽ If your watch has a screw lock type crown, unscrew the crown first, and then pull it out to the second click.

✽ To set the second hand exactly, pull out the crown to the second click at a moment the second hand is pointing to the 12 o’clock (“ 0 ” second) position.

Second click position

Original position

2.	Turn the crown to set the time.		English
	✽	and then turn it back to the exact time.	English
	✽	Remember to check the 24-hour indicator to correctly set AM/PM.
	✽ To set the time accurately, advance the minute hand 4 to 5 minutes ahead of the correct time,
3.	Push the crown back into the original position. The watch immediately starts
	ticking.
	✽	To set the second hand exactly, push the crown back into the original position in accordance
		with a time signal.

CAUTION

●Avoid setting the time or calendar at a time between 23:00 and 1:00.

✽If you adjust the time or calendar at a time between 23:00 and 1:00, and the date is incorrectly advanced or delayed one day, readjust the watch avoiding the above period of time.

●While the watch runs in normal operation, the date changes during the time between 23:30 and 0:30.