To Preserve the Quality of Your Watch, Temperatures

TO PRESERVE THE QUALITY OF YOUR WATCH

●Repair of diver’s watches requires special expertise and equipment. If you find that your diver’s watch is malfunctioning, therefore, never attempt to repair it but immediately send it to a nearby SEIKO Service Center.

■TEMPERATURES

Your watch works with stable accuracy within a temperature range of 5° C and

+60°C ° °°° °

35 C (41 F and 95 F). Temperatures over 60 C (140 F) may cause battery -10°Cleakage or shorten the battery life. Do not leave your watch in very low temperatures below –10°C (+14° F) for a long time since the cold may cause a slight time loss or gain. However, the above conditions will be corrected when

the watch returns to normal temperature.

English

■MAGNETISM

■CHEMICALS

■PERIODIC CHECK

N S

Your watch will be adversely affected by strong magnetism . Keep it away from close contact with magnetic objects.

Be careful not to expose the watch to solvents, mercury, cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may

b e c o m e d i s c o l o r e d , deteriorated or damaged.

2 - 3 Years

It is recommended that the watch be checked once every 2 to 3 years b y a n A U T H O R I Z E D S E I K O DEALER or SERVICE CENTER to ensure that the case, crown, gasket and crystal seal remain intact.