JVC TH-M505, TH-M603, TH-M606, TH-M303, TH-M501, TH-M301 manual Playback, Basic playback

Playback

•The icon such as shows the types of discs the operation is available for.

IMPORTANT

Before using the remote control for the following operation;

1 Set the remote control mode selector to

AUDIO.

2 Press DVD.

Basic playback

1 Press the desired DISC (1-5) 0 on the center unit.

•The system turns on and the disc tray comes out.

The buttons described below are used on pages 22 to 25.

(play button)	Remote control
	mode selector

2Place a disc.

Label side up

3Press DISC (1-5).

For MP3/WMA disc

When placing an 8 cm (3 inches) disc

Number buttons

Disc lamps (TH-M606/TH-M603/TH-M505/ TH-M501 only)

The file control display (A pg. 30) appears on the TV screen.

For JPEG disc

Each file (still pictures) is shown on the TV screen for about 3 seconds (slide-show). When stopping playback, the file control display (A pg. 30) appears on the TV screen.

For MPEG4 disc

Pressing TOP MENU or MENU shows the file control display (A pg. 30) on the TV screen during playback.

7To pause playback

Press 8.

To return to playback, press 3 (play button).

7To stop

Press 7.

7On-screen guide icons

During DVD VIDEO playback, the following guide icons may appear for a while on the TV screen;

•: appears at the beginning of a scene containing multi- subtitle languages.

•: appears at the beginning of a scene containing multi-audio languages.

•: appears at the beginning of a scene containing multi-angle views.

• (Play), (Pause), / (Fast forward/

fast-reverse), / (Slow-motion forward/ reverse): appears when you perform each operation.

•B: the disc cannot accept an operation you have tried to do.

Continued on next page

22