Tuner operations
IMPORTANT
Before using the remote control for the following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
The buttons described below are used on pages 42 to 43.
Remote control mode selector
Number buttons
Manual tuning
1Press FM/AM repeatedly to select the band.
Example:
When the system is tuned in to 810 kHz.
8 1 0 k
2Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts searching for stations and then release it, the system stops searching automatically when a station of sufficient signal strength is tuned in to.
NOTE
•When a station of sufficient signal strength is tuned in, the TUNED indicator lights on the display window.
•When an FM stereo program is received, the ST indicator lights on the display window.
42