JVC FS-H35 Tuning in to a Preset Station, Tune in to the station you want to preset, Press SET

Page 16

To preset stations manually—Manual presetting

You need to preset stations separately for the FM and

To tune in to a preset station directly using the number buttons

AM bands.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start over from step 2.

On the remote control ONLY:

1Tune in to the station you want to preset.

• See “Tuning in to a Station” on page 12.

2	Press SET.	SET

On the remote control ONLY:

Pressing the number button(s) allows you to select the preset number you want.

Ex.: For preset number 5, press 5. For preset number 15, press

+10, then 5.

For preset number 20, press +10, then 10.

For preset number 30, press +10, +10, then 10.

1 2 3

4 5 6

7 8 9

1010

3Press UP or DOWN to select a preset number.

4Press SET again.

UP

DOWN

The tuned station in step 1 is stored in the preset number selected in step 3.

•Storing a new station on a used number erases the previously stored one.

When you unplug the power cord or if a power failure occurs

The tuner preset stations will be erased in a few days. If this happens, preset the stations again.

Tuning in to a Preset Station

On the remote control ONLY:

1Press TUNER to select the band.

TUNER

The unit automatically turns on and tunes in to the previously received station—either FM or AM.

•Each time you press the button, the band alternates between FM and AM.

2Press UP or DOWN to select a preset number.

UP

DOWN

13

Image 16

Contents Compact Component Sysem Mises en garde, précautions et indications diverses For Canada/pour le Canada Introduction PrecautionsAbout This Manual Contents Location of the Buttons Main UnitTop view Front viewDisplay window Main unit Display windowRemote Control Pressing one of these buttons also turns on the unitSupplied Accessories Connecting AntennasGetting Started FM antennaConnecting Speakers Turn the AM loop antenna until you have the best receptionRelease your finger from the clamp To connect an outdoor AM antennaConnecting Other Equipment To connect the AC power cordTo remove the speaker grilles To connect an audio equipmentPutting the Batteries into the Remote Control When using the unit in your carSetting the Clock Common OperationsAdjusting the Volume Adjusting the Tone Bass/TrebleReinforcing the Bass Sound LevelPresetting Stations Tuning in to a StationListening to FM and AM Broadcasts Tuning in to a Preset Station Tune in to the station you want to presetPress SET Press SET againWhen playing a CD-R or CD-RW Playing Back DiscsPress 0 Open on the unit General notesBasic Disc Operations Programming the Playing Order of the Tracks-Program PlayTo check the program contents Playing at Random-Random PlayRepeating Tracks-Repeat Play Press RandomPlaying Back Tapes Playing Back a TapePress for cassette deck on the unit Put a cassette in with the exposed part of the tape downTo record on both sides-Reverse Mode RecordingRecording on a Tape To protect your recordingDisc Direct Recording One Track RecordingPress ONE Touch Repeat steps 2 and 3 to record other tracks you wantUsing the Timers Using Daily Timer and Recording TimerSet the on-time when you want the unit To turn on Set the off-time when you want the unit To turn off standbyAdjust the clock if you need Select the volume levelTo deactivate the timer temporarily With the source to playUsing Snooze Timer Using Sleep TimerHow the Sleep Timer actually works Press SleepMaintenance Cleaning the unitTo clean the disc Stains on the unitTo clean the heads, capstans, and pinch rollers Handling cassette tapesTo keep the best recording and playback sound quality To demagnetize the headsTroubleshooting SymptomCause ActionSpecifications Limited Warranty Authorized Service Centers 0303MWMMDWJEM