Maintenance
To get the best performance from the unit, keep your discs, tapes, and mechanism clean.
Cleaning the unit | Handling discs |
•Stains on the unit
Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water- diluted neutral detergent and wrung well, then wipe clean with a dry cloth.
•Since the unit may deteriorate in quality, become damaged or have its paint peel, be careful about the following.
insecticides to it.
• Remove the disc from its case by holding it at the edge while pressing the center hole lightly.
• Do not touch the shiny surface
of the disc, or bend the disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc when placing it back in its case.
• Avoid exposure to direct sunlight, temperature extremes, and moisture.
To clean the disc
Wipe the disc with a soft cloth in a straight line from center to edge.
DO NOT use any
record cleaner, spray, thinner, or
23