Timex W223 NA manual Chronograph Chronograph is Capable of Measuring, To Adjust Chronograph Hands

ENGLISH

CHRONOGRAPH

THE CHRONOGRAPH IS CAPABLE OF MEASURING:

•1/20 seconds elapsed up to 1 second (2 o’clock eye).

•Seconds elapsed up to 1 minute (chronograph second hand).

•Minutes elapsed up to 30 minutes (10 o’clock eye).

NOTE: Chronograph will operate continuously for 4 hours, after which it will automatically stop and reset.

NOTE: The 1/20th of a second hand does not move during chronograph function, the 1/20th seconds are indicated when chronograph is stopped and not yet reset.

BEFORE USING THE CHRONOGRAPH, adjust all the chronograph hands to the “0” or 12-hour positions.

ENGLISH

TO ADJUST CHRONOGRAPH HANDS:

1.PULL crown out to “B” position.

2.PRESS pusher “B” until the hand at the 10 o’clock eye resets to the “30” position.

3.PULL crown out to “C” position.

4.PRESS pusher “A” until the chronograph second hand resets to the “0” or “60” or 12-hour position.

5.PRESS pusher “B” until the hand at the 2 o’clock eye resets to the “0” position.

6.PUSH in Crown to “A” position.

NOTE:

•Make sure the chronograph is stopped and reset before adjusting.

•PRESSING and HOLDING either pusher “A” or “B” for 2 seconds will cause the hands to move continuously until the pusher is released.

32 33