DATE SETTING
TO PRESERVE THE QUALITY OF YOUR WATCH
Date
Crown a b
a)Normal position
b)First click
1.Pull out the crown to the first click.
2.Turn the crown clockwise until the previous day’s date appears.
3.Pull out the crown to the second click, and advance the hour and minute hands until the desired time and date appear.
4.Push the crown back in to the normal position.
■ WATER RESISTANCE |
• |
If “WATER RESISTANT” is not inscribed on the case back, your |
watch is not water resistant, and care should be taken not to get it |
wet as water may damage the movement. If the watch becomes |
wet, we suggest that you have it checked by an AUTHORIZED SEIKO |
DEALER or SERVICE CENTER. |
• Water resistance (3 bar) |
If “WATER RESISTANT” is inscribed on the case back, your watch |
is designed and manufactured to withstand up to 3 bar, such as |
accidental contact with splashes of water or rain, but it is not |
designed for swimming or diving. |
• Water resistance (5 bar)* |
If “WATER RESISTANT 5 BAR” is inscribed on the case back, your |
watch is designed and manufactured to withstand up to 5 bar and |
is suitable for swimming, yachting and taking a shower. |
• Water resistance (10 bar/15 bar)* |
Note: Do not set the date between 9:00 p.m. and 1:00 a.m. as the date may not change properly. If it is necessary to set the date during that time period, first move the hands so that the time shown is either before or after this period, adjust the date and then reset the correct time.
If “WATER RESISTANT 10 BAR” or “WATER RESISTANT 15 BAR” |
is inscribed on the case back, your watch is designed and |
manufactured to withstand up to 10 bar/15 bar and is suitable for |
taking a bath and shallow diving, but not for scuba diving. We |
recommend that you wear a SEIKO Diver’s watch for scuba diving. |