TECHNICAL GUIDE | Cal. 5J32A |
| Notes: |
Second | Intermediate | Second wheel |
rotor | second wheel | and pinion |
*Lubricate the minute wheel and pinion before reassembling it to the train wheel bridge. When lubricating it, take care not to stain the pinion with oil.
*Do not lubricate the lower pivots of the third wheel and pinion and intermediate second wheel excessively. Be sure to observe the specified quantity.
43 Spacer for center wheel and pinion
•Setting position
See the illustration at right.
•How to install
“A” and “B” portions have elasticity and are made tight for the guide tubes to which they are set. After setting the spacer for center wheel and pinion, press down those portions so that it is well seated in position.
Note: Take utmost care not to deform or |
|
| |
damage the portion that makes |
|
| |
contact with the center wheel and | “A” portion | “B” portion | |
pinion. | |||
|
|
48Setting lever spring screw
49Setting lever spring
•How to install
· Check that the setting lever spring is |
|
securely set in position before tightening |
|
the setting lever spring screw. | Setting lever spring |
· Then, gently bend the spring portion of | Setting lever spring screw |
the setting lever spring so that it catches | |
the tube of the setting lever. |
|
Note: Take care not to bend the spring
portion more than necessary.
• Lubricating
See the illustration at right.
Tube of the setting lever
Lubricating: | : Moebius A | : Moebius F | : SEIKO Watch Oil | 13 |