JVC UX-V10 manual Setting the Sleep Timer, Insert a blank or erasable tape into the Cassette Deck

Page 25

7Press the ¢ or 4 button until “TUNER” appears and the REC indicator lights up on the display.

The display changes as shown below.

8Set the volume level.

1.Press the TIMER button on the Unit.

The current volume setting flashes on the display.

2.Press the ¢or 4button to select the volume level.

-- : The current volume level will be used.

0 to 40 : When the timer is turned on, the Volume will be automatically set to the selected level.

To turn off the volume while the Recording Timer is

working, set the volume level to “0”.

9Press the TIMER button on the Unit.

The timer setting is completed and the display returns to the indi- cations before you set the timer. The Timer indicator remains lit. Note: If you change the station before turning off the System,

the last received station will be recorded.

10 Insert a blank or erasable tape into the Cassette Deck.

•Make sure that the tape has the enough length for recording.

11 Press the button to turn off the System.

To cancel the timer, press the TIMER button for more than 2 seconds. The REC and Timer indicators go out on the display.

To re-activate the canceled timer, press the TIMER button for more than 2 seconds to light the REC and Timer indicators.

To confirm the timer settings, cancel the timer once by pressing the TIMER button, and press the button again for more than 2 seconds. Then, press the TIMER button repeatedly, to see the current timer settings (ON time, OFF time, source, and volume). Press the TIMER button to set the timer again.

To change the timer setting, repeat the setting procedure from the beginning.

•When the timer turns on, the Timer indicator starts flashing.

Note: If the Unit is turned on when the timer-on time comes, Recording Timer does not work.

CAUTION:

If the System is unplugged, or a power failure occurs, the timer will be canceled. You will need to reset the clock first, then the timer.

Setting the Sleep Timer

When a source is playing, use the Sleep Timer to turn the System off after a certain number of minutes. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by itself rather than play all night.

■You can only set the Sleep Timer when the System is on.

Note: The clock must be correctly set for the timers to work. If the clock has not been set, the CLOCK indicator will flash on the display when you press the TIMER button for more than 2 seconds, and then the display alternates between “ADJUST” and “CLOCK” for about 5 seconds.

1Play a CD or a cassette tape, or tune in to the desired station.

2Press the SLEEP button on the Remote Control.

The SLEEP indicator lights up.

3Set the length of time you want the source to play before shutting off.

•Each time you press the SLEEP button, it changes the number of minutes shown on the display in this sequence:

10 20 30 60

Canceled 120 90

After setting the number of minutes for the Sleep Timer, the display will stop flashing and return to the previous state.

The System is now set to turn off after the number of minutes you set.

To confirm the Sleep Time

When the SLEEP button is pressed, the remaining sleep time is displayed.

To cancel the Sleep Timer setting

Press the SLEEP button until the SLEEP indicator goes out on the display.

Turning off the System also cancels the Sleep Timer.

English

21

Page 24 Page 26
Image 25
Page 24 Page 26
Contents UX-V10 Micro Component SystemAchtung Vorsicht Ausreichende Belüftung Voorzichtig Goede ventilatie vereistPrecaucion ventilación correcta Attenzione Per una corretta ventilazioneClass Laser Product Table of Contents How to Put Batteries in the Remote Control AccessoriesUsing the Remote Control Getting StartedConnecting the AM MW/LW Antenna Connecting the FM AntennaUsing the supplied Wire Antenna Using the coaxial type connector not suppliedConnecting External Equipment Connecting the SpeakersOn the Unit On the Remote Control Connecting the AC Power CordAdjusting the Volume Turning the Power On and OffCommon Operations Turning the System onAdjusting the treble level Adjusting the bass levelReinforcing the Bass Sound AHB PRO Controlling the Tone Bass/ TrebleTuning In a Station Using the TunerPresetting Stations Presetting stations manuallyPresetting stations automatically Changing the FM Reception ModeReceiving FM Stations with Press the SET button within 5 secondsSearching for a program by PTY codes News News Switching to a program type of your choice temporarilyInserting a CD Using the CD PlayerUnloading a CD Programing the Playing Order of the Tracks Basics of Using the CD Player Normal PlayPress the Repeat button on the Remote Control Press the Random button on the Remote ControlPlaying at Random Repeating TracksReverse Mode Using the Cassette Deck Listening to a TapeStandard Play One touch playStandard Recording Using the Cassette Deck RecordingThings to know before you start recording One track recording CD Direct RecordingPress the CD #/8 button twice To stop at any time during the recording process, pressListening to External Equipment Using External EquipmentTo exit from AUX mode, select another source Setting the Clock Using the TimersSetting the Daily Timer Set the volume level Setting the Recording TimerPress the Timer button on the Unit Select the music sourceInsert a blank or erasable tape into the Cassette Deck Setting the Sleep TimerPress the button to turn off the System Care and Maintenance Symptom TroubleshootingPossible Cause ActionSpecifications EN, GE, FR, NL, SP, IT 0100MWMMDWJEM

UX-V10, UX-V20R specifications

The JVC UX-V20R and UX-V10 are impressive micro hi-fi systems that combine advanced audio technology with sleek design, making them a great choice for music enthusiasts. Both models stand out due to their compact size, making them suitable for small spaces without compromising on sound quality.

The JVC UX-V20R features a powerful 100 watts RMS output, which ensures robust sound performance across various genres. This model is equipped with a dual cassette deck that allows for convenient playback and recording, catering to users who still appreciate the nostalgic charm of cassette tapes. Furthermore, the UX-V20R supports CD playback, complete with a digital sound processor that enhances audio quality, resulting in a rich listening experience.

One of the key technologies in this system is the incorporation of JVC's Advanced Surround feature, providing an immersive audio listening experience. This technology simulates a multi-speaker environment, allowing users to feel as if they are at a live performance, even when using a standard stereo configuration. Additionally, the UX-V20R is compatible with various audio sources, including AM/FM radio and auxiliary inputs, allowing users to connect their smartphones or other devices effortlessly.

On the other hand, the JVC UX-V10, while boasting a slightly lower power output at around 80 watts RMS, maintains impressive audio fidelity. This model also includes a built-in CD player and FM radio, providing versatility for different listening preferences. The UX-V10 focuses on delivering crisp highs and deep lows, thanks to its custom speaker design that optimizes sound dispersion.

Another noteworthy feature of the UX-V10 is its user-friendly interface, complete with an easy-to-read LCD display and intuitive controls, allowing for seamless navigation through tracks or radio stations. Both models come with remote controls, adding to convenience and flexibility in managing playback without needing to be in close proximity to the system.

The design of the JVC UX-V20R and UX-V10 is elegant and contemporary, making them an appealing addition to any décor. The systems are compatible with various formats and sources, making them versatile solutions for music lovers. Whether it's for casual listening, hosting gatherings, or simply enjoying high-quality audio at home, the JVC UX-V20R and UX-V10 fulfill a blend of performance, functionality, and aesthetic appeal.
Top Page Image Contents