Impex MWB 850 manual Diagram

Page 8

STEP 3 (See Diagram 3)

A.) Attach two Ø ¾” Bushings (#54) to the pivot on the Main Seat Support (#1).

B.) Attach two Backrest Supports (#7) to the Pivot and align the holes. Secure it with one M10 x 6 ¼” Allen Bolt (#39), two ¾” Washers (#48), and one M10 Aircraft Nut (#50).

C.) Attach two Ø ¾” Bushings (#54) to the pivot on the Sliding Block (#10).

D.) Attach the holes on the two Backrest Supports to the Pivot. Align the holes. Secure them with one M10 x 6 ¼” Allen Bolt (#39), two ¾” Washers (#48), and one M10 Aircraft Nut (#50).

E.) Do not over tighten the Nuts and Bolts. Make sure the Backrest Supports are able to swivel.

DIAGRAM 3

7

Image 8 Contents
Marcy MWB Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Hardware Pack Hardware Pack Assembly Instruction Diagram Diagram Diagram Diagram Bolts #44 and Ø5/8 Washers #49 Diagram Page Parts List Impex INC