JVC UX-V20R/UX-V10 manual Using the Timers, Setting the Clock, Setting the Daily Timer

Using the Timers

English

SLEEP

FMAUTO

SLEEP DISPLAY MODE PRESET

AUX	TAPE	FM/AM	CD
CD
REPEAT	PTY/EON	UP	DISPLAY
			MODE
PROGRAM		SET
RANDOM		DOWN
AHB
PRO	BASS	TREBLE	CANCEL

VOLUME

STANDBY

AUX

REC

REV

MODE

TAPE	FM/AM	CD
PHONES
DOWN	MULTI CONTROL	UP

AHB

PRO

VOLUME

TIMER

CLOCK

CD

OPEN/CLOSE

Timer indicator

TIMER
	ON	SLEEP
CLOCK
	OFF	CLOCK
¢
4
	ON time, OFF time

REMOTE CONTROL RM-SUXV20R

When the System is in use, the display shows other items as well.

For simplicity, only the items described in this section are shown here.

The timers let you control listening and recording functions automatically.

Setting the Clock

•When you plug the AC power cord into the wall outlet, the

CLOCK indicator flashes on the display.

You can set the clock whether the System is on or off.

Setting the Daily Timer

Once you have set the Daily Timer, the timer will be activated at the same time every day. It can be canceled and re-activate whenever you wish.

The Timer indicator on the display shows when the Daily Timer you have set will be activated.

Notes:

Notes:					• Finish each step within 30 seconds. Otherwise, the setting is
• The clock must be correctly set for the timers to work.					cleared and the procedure must be repeated from the beginning.
• The procedure must be completed within 2 minutes. Otherwise,					• The clock must be correctly set for the timers to work.
the setting is cleared and must be repeated from the beginning.					If the clock has not been set, the CLOCK indicator will flash
CLOCK	DOWN		UP	CLOCK	on the display when you press the TIMER button for more than
		or			2 seconds, and then the display alternates between “ADJUST”

and “CLOCK” for about 5 seconds.

(For 2 seconds)

1Press the CLOCK button on the Unit for more than 2 seconds.

The hour digits rapidly flash on the display.

2Press the ¢ or 4 button to set the hour.

Pressing the ¢button moves the hour forwards and pressing the 4button moves it backwards. Hold down the button to move the hour rapidly.

3Press the CLOCK button.

The minute digits rapidly flash on the display.

4Press the ¢ or 4 button to set the minute.

Pressing the ¢button moves the minute forwards and pressing the 4button moves it backwards. Hold down the button to move the minute rapidly.

5Press the CLOCK button again.

The selected time is set and the seconds start counting from 0. The CLOCK indicator remains lit on the display.

CAUTION:

If the System is unplugged, or a power failure occurs, the timer setting will be lost. You will need to reset the clock first, then the timer.

Note: The clock may gain or lose 1 to 2 minutes per month.

1Press the TIMER button on the Unit for more than 2 seconds.

The ON indicator lights up, and then the current ON time flashes on the display. (Example: 12:00)

ON

2Set the ON time. (Example: 12:15)

Press the ¢or 4button on the Unit to set the hour you want the Unit to come on.

Pressing the ¢button moves the hour forwards and pressing the 4button moves it backwards. Hold down the button to move the hour rapidly. Press the TIMER button to adjust the

minute.

ON

3Set the OFF time. (Example: 13:15)

1.Press the TIMER button on the Unit.

The hour digits of the current OFF time flashes, and then the OFF indicator lights up on the display.

OFF

2.Press the ¢ or 4button on the Unit to set the time you want the Unit to be turned off.

Pressing the ¢button moves the hour forwards and pressing the 4button moves it backwards. Hold down the button to move the hour rapidly. Press the TIMER button again to adjust the minute.

OFF

19