Impex MP-PWR10.0 manual See Diagram

Page 12

STEP 6 (See Diagram 6)

A.) Attach the Rear Vertical Frame (#9) onto the Rear Base (#8). Secure it with two M10 x 2 ½” Carriage Bolts (#74), Ø ¾” Washers (#69), and M10 Aircraft Nuts (#72).

B.) Attach the Rear Base (#8) and Front Vertical Frame (#10) to the Rear Stabilizer (#7). Align the holes and secure them together with two M10 x 2 ½” Carriage Bolts (#74), Ø ¾” Washers (#69), and M10 Aircraft Nuts (#72).

C.) Align the Front Vertical Frame (#10) to the Cross Brace (#6). Secure it with one 4 3/8” x 1 ¾” Bracket (#22), two M10 x 2 ½” Carriage Bolts (#74), two Ø ¾” Washers (#69), and two M10 Aircraft Nuts (#72).

D.) Slide the Sliding Weight Post (#12) onto the Rear Vertical Frame (#9) from the top. E.) Attach the Upper Frame (#11) onto the Front Vertical Frame (#10). Secure it with two

M10 x 5/8” Allen Bolts (#82) and Ø ¾” Washers (#69).

F.) Attach the rear of Upper Frame (#11) to the Rear Vertical Frame (#9). Secure it with one M10 x 2 ½” Allen Bolt (#77), Ø ¾” Washer (#69), and 3 1/8” x 1 ¾” Bracket (#21) to the upper hole. Secure the lower hole with one M10 X 2 ½” Carriage Bolt (#74), Ø ¾” Washer (#69), and M10 Aircraft Nut (#72).

G.)Securely tighten all Nuts and Bolts previously installed.

11

Image 12
Contents Marcy Platinum Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice PrecautionsHardware Pack Hardware Pack Hardware Pack Assembly Instruction DiagramDiagram Diagram Diagram See Diagram See Diagram Diagram Cable Loop Diagram See Diagram 7 & Cable Loop Diagram See Diagram 8 & Cable Loop Diagram Diagram Page Rack Exploded Diagram Parts List ’tyImpex INC Info@impex-fitness.com