Impex MD-377 manual Assembly Instruction, Diagram

Page 6

ASSEMBLY INSTRUCTION

Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches

NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Plug the two Upright End Caps (#17) onto the bottom of the Right & Left Upright Beams (#1 & #2). Secure each Cap with a ST5 Screw (#40).

B.) Connect the two Upright Beams by a Cross Brace (#4) in the Mid-span. Secure them with two M10 x 3 1/8” Carriage Bolts (#27), one Curved Bracket (#13), two ¾” Curved Washers (#37), and two M10 Aircraft Nuts (#38) on each end of Cross Brace.

C.) Insert the Backrest Adjustment Bar (#9) through the holes on the two Uprights to obtain desired incline of Backrest.

DIAGRAM 1

5

Image 6
Contents Marcy Diamond Elite Weight Bench Table of Contents Before YOU BeginImportant Safety Notice PrecautionsPage Hardware Pack Assembly Instruction DiagramSecurely tighten all Nuts and Bolts previously installed Diagram Diagram Diagram Page Parts List Description QuantityPage Impex INC