STEP 2 (See Diagram 2)
A.) Plug a Front Leg End Cap (#19) onto the bottom of Front Leg (#5). Attach the Front Leg to the Main Seat Support (#3). Secure it with three M8 x 5/8” Allen Bolts (#30) and three Ø 5/8” Washers (#35). DO NOT tighten the Bolts yet.
B.) Attach the Main Seat Support to the Cross Brace (#4). Secure it with two M10 x 2 3/8” Carriage Bolts (#28), one Bracket (#12), two Ø ¾” Washers (#34), and M10 Aircraft Nuts (#34). DO NOT tighten the Bolts yet.
C.) Attach one end of Diagonal Support (#8) to the Front Leg. Secure it with one M8 x 5/8” Allen Bolt (#30) and Ø 5/8” Washer (#35). Attach the other end to the Main Seat Support. Secure it with one M8 x 2 1/8” Allen Bolt (#29), two Ø 5/8” Washers (#35), and one M8 Aircraft Nut (#39).
D.) Securely tighten all Nuts and Bolts previously installed.
DIAGRAM 2
6