STEP-10 (See Diagram 10)
A.) Attach the Leg Developer Holder (#2) to the Main Seat Support (#1). Secure it with one M10 x 5/8” Allen Bolt (#90) and Ø ¾” Washer (#89) from the top, two M10 x 3 ¾” Carriage Bolts (#101), two Ø ¾” Washers (#89), and two M10 Aircraft Nuts (#106) from the side.
B.) Attach the Leg Developer (#12) to the Leg Developer Holder (#2). Secure it with one Axle (#18), two M10 x 5/8” Allen Bolts (#90), and two ∅ ¾” Washers (#89).
C.) Attach an Olympic Sleeve (#62) onto the weight post on Leg Developer. Attach a Spring Clip (#83) to the Sleeve.
D.) Insert the Arm Curl Stand (#6) into the top opening on the Leg Developer Holder. Use a Lock Knob (#79) to secure the Stand at desired height.
DIAGRAM 10
21