JVC UX-T550 Recording, Synchronized recording with the CD player, To record one track

RECORDING

●During recording, the ALC (Automatic Level Control) circuit auto- matically optimizes the recording level, so manual recording level adjustment is unnecessary.

●Check that the safety tab on the cassette tape is not broken off.

Note: This unit has recording characteristics suitable for

normal and CrO2 tapes. Normal and CrO2 tapes have different characteristics from metal tapes.

Synchronized recording with the CD player

●In this system, the CD player starts play when the cassette deck enters the recording mode.

Operate in the order shown

4 5 6 SLEEP

7	8	9	DISPLAY
MICRO COMPONENT SYSTEM UX-T550		AUTO	STEREO
10	+10
		PRESET	AUTO/MONO

COMPACT

TAPE	TUNER	C D	DIGITAL AUDIO
AUX	BAND

A U T O T A P E S E L E C T O R

REVERSE

	Û	MODE
		REW	MULTI CONTROL FF
AUTO REVERSE		BEAT CUT PROGRAM	RANDOM REPEAT
		BASS	TREBLE
			ACTIVE HYPER	TIMER/SNOOZE
			BASS PRO
		AHB.PRO	VOLUME	CLOCK
			ONE TOUCH		BAND
			REC
				TAPE	TUNER	CD

OPEN

LTI J	OG
MU

~

~Load a cassette with side A facing out. (Wind past the tape leader before starting recording.)

ÙLoad a CD and close the CD holder. ! Set to the CD mode.

Ú Press the 7 button to set stop mode.

@ Select the required reverse mode ( or ).

●When programmed play is required, program the required tracks using the remote control. (See page 9.)

●Select tracks with a total playing time which does not exceed the tape length.

ÛPress the ONE TOUCH REC button; synchronized recording will start.

(The recording indicator lights up.)

●Recording starts in the forward direction and CD play starts auto- matically.

●After the CD player has played the entire CD or programmed tracks, the deck stops automatically.

●Non-recorded sections of approx. 4 seconds are automatically left between tunes

●To stop recording in the middle, press the 7 button. The cassette deck also stops after 4 seconds.

Note:

●During CD synchro recording, the #8, SEARCH (4, ¢) buttons and MULTI JOG dial do not function.

@Ú ! Ù

When non-recorded section between tunes is not required ...

1Press the #8 button twice. The CD Player enters the pause mode.

2 Press the ONE TOUCH REC button to start recording.

Note:

●Depending on the CD used, non-recorded sections of different lengths may be left between tunes.

●CD complete recording function (Synchro recording mode only) If the tape is reversed while a CD is being played, recording will be done on the reverse side of the tape as follows:

*When less than 12 seconds of the last tune on the forward side of the tape have been recorded, recording on the other side of the tape will start from the beginning of the previous track.

*When more than 12 seconds of the last tune on the forward side of the tape have been recorded, recording on the other side of the tape will start from the beginning of the current track.

●To record one track

Play the track to be recorded. Then pressing the ONE TOUCH REC button locates the beginning of the track and enter the one track re- cording mode. After the recording is finished, the CD player and cas- sette deck both stop.

Recording from the radio or an external source connected to the AUX terminals

Operate in the order shown

STANDBY

	VOLUME						COMPACT
							DIGITAL AUDIO
		1	2	3
AUX
Ù		4	5	6	SLEEP
		7	8	9	DISPLAY
MICRO COMPONENT SYSTEM UX-T550				AUTO	STEREO
		10	+10
				PRESET	AUTO/MONO
		AUX	TAPE	TUNER	C D
A U T O T A P E S E L E C T O R				BAND
		REVERSE			ACTIVE HYPER	TIMER/SNOOZE
					BASS PRO
	!	MODE
			REW	MULTI CONTROL FF		CLOCK
~					ONE TOUCH		BAND
			PROGRAM	RANDOM	REC
AUTO REVERSE		BEAT CUT			REPEAT	TAPE	TUNER	CD
		BASS		TREBLE
		AHB.PRO			Ú		Ù
				VOLUME

OPEN

LTI J	OG
MU

~ Load a cassette with side A facing out.	! Select the required reverse mode ( or	).
(Wind past the tape leader before starting recording.)	Ú Press the ONE TOUCH REC button.

ÙSelect the source to be recorded.

TUNER: Press the TUNER/BAND button. Tune to the required sta- tion.

AUX: Press the AUX button.

12