Impex MWM7150 manual Nuts. Make sure the Front Press can move smoothly

Page 12

STEP 3 (See Diagram 3)

A.) Attach the Front Press (#4) to the Upper Frame (#3). Secure it with one Front Press Axle (#27), two Ø ¾” Washers (#59), and two M10 Aircraft Nuts (#56). Do not over tighten the

Nuts. Make sure the Front Press can move smoothly.

B.) Insert the two Front Press Handles (#15) into the arms of Front Press. Secure each Handle with one M10 x 1” Allen Bolt (#47) and one Ø ¾” x Ø 1” Curved Washer (#62).

C.) Attach the Backrest Board (#30) to the Vertical Frame (#2). Secure it with two M8 x 2 ½” Allen Bolts (#51) and two Ø 5/8” Washers (#58).

DIAGRAM 3

Image 12

Contents Marcy Home GYM Toll-Free Customer Service Number Mon. Fri a.m. 5 p.m. PST Important Safety Notice Page Hardware Pack Hardware Pack Hardware Pack Assembly Instruction Diagram Securely tighten all Nuts and Bolts installed Diagram Nuts. Make sure the Front Press can move smoothly Diagram Cable Loop Diagram See Diagram 5 & Cable Loop Diagram Diagram See Diagram 6 & Cable Loop Diagram 110＂ Parts List ’tyWeight Resistance Chart Numbers are approximate Actual weights may varyImpex INC Info@impex-fitness.com