STEP 5 (See Diagram 5)
A.) | Attach the Rear Vertical Frame (#6) onto the Rear Base (#16). Secure it with two M10 x 2 |
| ¾” Carriage Bolts (#85) from the bottom, two ∅ ¾” Washers (#80) and two M10 Aircraft |
| Nuts (#82) on the top. Slide the Sliding Weight Post (#11) onto the Rear Vertical Frame |
| from the top. |
B.) | Place the Rear Base (#16) in between the two Rear Left & Right Stabilizers (#7 & #8). |
| Attach the Front Vertical Frame (#9) onto the Rear Base (#16). Align the holes and secure |
| them all together with two M10 x 3 1/8” Carriage Bolts (#88), ∅ ¾” Washers (#80), and |
| M10 Aircraft Nuts (#82). |
C.) | Slide the Sliding Pulley Bracket (#17) onto the Front Vertical Frame (#9). Use a Lock Knob |
| (#68) to lock the Sliding Pulley Bracket at selected position. |
D.) | Secure the Front Vertical Frame (#9) to the Rear Cross Brace (#5) with two M10 x 2 ¾” |
| Carriage Bolts (#85), one 4 ¾” Bracket (#27), two ∅ ¾” Washers (#80), and two M10 |
| Aircraft Nuts (#82). |
E.) | Attach the Upper Frame (#10) to the top of Front Vertical Frame (#9). Secure it with two |
| M10 x 5/8” Allen Bolts (#98) and ∅ ¾” Washers (#80). |
F.) | Attach the rear of Upper Frame to the top of Rear Vertical Frame (#6). Secure it with one |
| M10 x 2 3/8” Allen Bolt (#95), ∅ ¾” Washer (#80) and 3 1/8” Bracket (#28) to the top hole. |
| Secure the bottom hole with one M10 x 2 ½” Carriage Bolt (#84), ∅ ¾” Washer (#80), and |
| M10 Aircraft Nut (#82). |
G.) | Securely tighten all Nuts and Bolts previously installed. |
12