ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches
NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.
STEP 1 (See Diagram1)
A.) Attach the Front Stabilizer (#10) to the Main Frame (#9). Secure it with two M10 x 3
1/8” Carriage Bolts (#11), ∅ 1” Bent Washers (#13), and M10 Acorn Nuts (#12). B.) Slide the Seat Post (#16) onto the Rear Base (#23). Insert the Seat Adjustment Bolt
(#17) from the bottom through the open slot to hold the desired Seat position and secure with a ∅ 7/8” Washer (#19) and Seat Adjustment Knob (#18).
C.) Attach the Rear Base (#23) to the Main Frame (#9). Secure it with six M8x 5/8” Allen Bolts (#20) and ∅ 5/8” Washers (#21).
D.) Attach the Rear Stabilizer (#24) to the Rear Base (#23). Secure it with two M10 x 3 1/8” Carriage Bolts (#11), ∅ 1” Bent Washers (#13), and M10 Acorn Nuts (#12).
E.) Turn the End Caps on the Rear Base (#23) to adjust the stability of the Bases.
Diagram 1
4