STEP 2 (See Diagram 2)
A.) Attach the back of the Main Seat Support (#10) to the Cross Brace (#3). Secure it with one 4 3/8” Bracket (#9), two M10 x 2 ½” Carriage Bolts (#36), two ∅ ¾” Washers (#37), and two M10 Aircraft Nuts (#38).
B.) Slide the Sliding Block (#11) onto the Main Seat Support (#10). Secure it with a Lock Knob (#8).
C.) Attach the Front Stabilizer (#12) to the Main Seat Support (#10). Secure it with two M10 x 2 ½” Carriage Bolts (#36), ∅ ¾” Washers (#37), and M10 Aircraft Nuts (#38).
D.) Insert the Leg Developer Holder (#13) into the Front Stabilizer (#12). Secure it with a Lock Knob (#8). Attach the Leg Developer (#17) to the bracket on the Leg Developer Holder (#13). Secure it with an Axle (#16), two ∅ ¾” Washers (#37), and two M10 x 5/8” Allen Bolts (#39). Attach a Spring Clip (#32) onto the weight post on the Leg Developer. NOTE: When using the decline position to do Ab exercises, place at least 30 lbs. of weights on the post to hold down the leg developer.
DIAGRAM 2
5