Impex WM-348 manual #10

Page 8

A.)

Attach the hole-side of the Backrest Supports (#60) onto both ends of the Pivot on the

 

Main Seat Support (#52). The other side rest against the Backrest Adjustment Bar

 

(#10).

B.)

Place the Backrest Board (#18) onto the Backrest Supports (#60). Secure it with four

 

M6 x 1 3/8” Hex Bolts (#50) and ½” Washers (#51).

C.)

Place Seat (#19) onto the bracket on the Main Seat Support (#52). Align the holes and

 

secure the Seat with four M6 x 1 3/8” Hex Bolts (#50) and ½” Washers (#51).

D.)

Insert the Arm Curl Stand (#22) into the opening on the top of the Front Stabilizer (#42).

 

Secure it with a Knob Bolt (#47).

E.)

Attach the Arm Curl Pad (#23) to the Arm Curl Stand (#22). Secure it with two M8 x 5/8”

 

Hex Bolts (#20) and 5/8” Washers (#21).

 

DIAGRAM 4

7

STEP 5 (SEE Diagram 5)

Image 8
Contents Powerhouse Table of Content Before YOU BeginImportant Safety Notice PrecautionsPage Assembly Instruction Diagram See DiagramDiagram Same step to install the other side #10 Diagram Diagram Parts List Description Quantity Impex INC