Impex TR-2 manual Diagram

Page 7

STEP 2 (See Diagram 2)

A.) Attach the lower Rear Support Frame (#2) to the Base Platform (#8). Secure it with one M10 x 4 7/8” Hex Bolt (#13), Ø ¾” Washer (#10), and M10 Aircraft Nut (#16). DO NOT tighten the Nut and Bolt yet.

B.) Insert bottom of Lower Pulley Support Base (#45) into the openings on the Base Platform.

Secure it with one M6 x 1¾” Hex Bolt (#14) and M6 Aircraft Nut (#15) to each opening. Use the Lock Knob (#28) on Lower Pulley Support Base to select the desired extension of the Extension Tube (#43).

C.) Attach the Lower Pulley Support Base (#45) to the Rear Support Frame (#2). Secure it with one M8 x 3 1/8” Hex Bolt (#46), one Ø ¾” Washer (#10), one Ø 5/8” Washer (#4), and one M8 Aircraft Nut (#47).

D.) Securely tighten all Nuts and Bolts previously installed.

DIAGRAM 2

5

Image 7
Contents Tech ROD GYM Page Before YOU Begin Table of ContentsImportant Safety Notice Hardware Pack Assembly Instruction Diagram Diagram Diagram Diagram Diagram Diagram See Diagram 8 & Lat Bar Cable Loop Diagram LAT BAR Cable Loop Diagram See Diagram 9 & Leg Developer Cable Loop Diagram LEG Developer Cable Loop Diagram See Diagram10 & Cable Loop Diagram Tech ROD Cable Loop Diagram Exploded Diagram Each side Butterfly Bench Press’ty Parts ListInfo@impex-fitness.com Impex INC