ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches.
NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the two Upright Beams (#1) by a Cross Brace (#2) in the
B.) Secure each end of Cross Brace to each Upright Beam with two M10 x 3 1/8” Carriage Bolts (#26), one Weight Post (#10), two Ø ¾” Washers (#35), and two M10 Aircraft Nuts (#33).
DIAGRAM 1
5