STEP 2 (See Diagram 2)
A.) Do not tighten the Nuts and Bolts until instructed to do so.
B.) Attach the Main Seat Support (#1) to Cross Brace (#2). Secure it with two M10 x 3 1/8” Carriage Bolt (#26), one Bracket (#14), two Ø ¾” Washer (#35), and two M10 Aircraft Nut (#33).
C.) Attach the Leg Developer Holder (#4) to the Main Seat Support. Secure it with three M10 x 5/8” Allen Bolts (#27) and three Ø ¾” Washers (#35).
D.) Attach the Diagonal Support (#11) to the Main Seat Support and Leg Developer Holder. Secure each end with one M8 x 5/8” Allen Bolt (#28) and Ø 5/8” Washer (#36).
E.) Securely tighten all Nuts and Bolts.
DIAGRAM 2
6