8. BATTERY REPLACEMENT/ RESET
•Press the M , S and R buttons simultaneously following battery replacement operations to reset the watch. Failure to reset the watch after battery replacement will result in improper timekeeping.
•Pressing all three buttons simultaneously will cause the watch display to highlight and a confirmation signal to sound indicating the reset operation is complete.
Upon reset the watch displays will return to the following initial settings:
Time: AM 12:00.00
Alarm: AM 12:00.00 OFF
Stopwatch: 00:00.00
Calender: Sunday January 1
Chime: OFF
9.SPECIAL HANDLING INSTRUCTIONS
1.Resistance to water
2. Avoid Extremes of Temperature
Avoid exposing this watch to direct sunlight or leaving it in a high temperature location for a long period of time. This will cause malfunctioning and shorten the life of the power cell and liquid crystal display panel. Do not leave this watch for long periods in a cold place. This may cause the watch to gain or lose slightly. If it is worn on the wrist, the original accuracy will be restored.
3. Avoid Strong Shocks
This watch will withstand normal shock incurred while playing golf or other sports. Avoid dropping it on the ground or otherwise imparting a severe shock to it.
4. Avoid Strong Magnetic Fields
This watch is unaffected by magnetic fields from domestic appliances, such as television and stereo sets.
5. Avoid chemicals and gases
Avoid wearing this watch in the presence of chemicals and gases. Be careful of using chemicals. Solvents such as benzene and paint thinner (and products containing such solvents such as gasoline, manicure remover, certain cleaners and adhesives) may cause discolouration, melting and bracking.
6. Keep watch clean
A watchband gets easily dirty with the sweat or dust since it directly touches the skin, and even a stainless or
For a mesh band because the meshes are very fine, its particularly “flexibility” will be lost if it is soiled in a long period of use.
In this respect, it is necessary to wash a metallic watch band periodically in order to keep the band beautiful at all times.
A metallic watch band is usually washed with a brush in soapy water. After that it is well wiped with the soft cloth having good water absorption properties to get rid of the water content. Then the band is dried completely. Please pay attention to prevent the water from getting inside the watch movement when the band is washed.
7. Periodic Inspection
Periodic Inspection of the watch at intervals of 1 to 2 years are recommended.
8.Be sure to keep the power cell away from infants or small children, should accidental ingestion occur, consult a doctor at once.