Citizen JMOXXX, 30-7XXX instruction manual Adjusting the Digital Time Display

CITIZEN QUARTZ

3. ADJUSTING THE DIGITAL TIME DISPLAY

ANA-DIGI

Model No. 30-7XXX, JMOXXX

Cal. No. C20❈, C480, T011

•INSTRUCTION MANUAL

CTZ-6751

1.SELECTING BASIC FUNCTIONS Press M button to select functions.

TIME ALARM STOPWATCH CALENDAR

TIME

SECONDS

MINUTES

HOURS

12/24 HOURS

TIME

1.Press M button to set to the normal TIME display

2.Press S button until SECONDS start flashing.

3.Press R to set seconds to “00”.

4.Press S for MINUTES adjustment. MINUTES start flashing.

5.Press R and adjust the minutes.

6.Press S for Hours adjustment. HOURS start flashing.

7.Press R and adjust the hours.

8.Press S for 12/24 HOURS selection. 12/24 HOURS starts flashing.

9.Press R and select 12 or 24-HOUR display.

10.Press S or M to finalise adjustment. The watch returns to the normal TIME display.

•Alarm, Stopwatch and calendar modes are indicated by each flashing mode mark.

•Crown – Analog display set,

M – Mode change, Instant manual return S – Selection, Reset, Split

R – Adjustment, Start, Stop, Alarm Set,

Illumination

★The Cal. C20❈ doesn’t have any STOPWATCH or CALENDAR mode mark.

2. ADJUSTING THE ANALOG DISPLAY

Pull out the crown one step and turn clockwise or counterclockwise direction to adjust the analog time display. The seconds hand will start timekeeping synchronising with the digital time display when the crown is returned to the original position.

•If the watch is left in the adjustment mode for about one minute without operating any buttons, AUTO RETURN will activate to return to the normal TIME display.

•If seconds adjustment is made when the SECOND display is showing 30-59 seconds, the MINUTE display will automatically advance to the next minute.

•INSTANT MANUAL RETURN to the normal time display can be made at any stage of adjustment by pressing M button.

•A and P marks display only under the 12-hour time system.