Freestyle The Response manual English

Page 1

 

THE TANGENT

 

S5

S4

S1

S3

S2

 

THE RESPONSE

 

S5

S4

S1

S3

S2

DIGITAL WATCH WITH TOUCH SENSOR TECHNOLOGY:

S1. Start/stop sensor

S2. Set/reset sensor

S3. Mode sensor

S4. Light sensor

S5. Touch sensor unlock button

SPECIAL FEATURE:

This Freestyle product features unique Hydro Pushers®: these pushers can be pressed under water to a dynamic wa- ter pressure (not water depth) of 3 ATM.

TO LOCK AND UNLOCK THE TOUCH SENSORS:

There are 4 touch sensors around the lens of the watch (S1,S2,S3,and S4). To unlock the sensors, press S5 button.

The touch sensor indicator (T) will be displayed to indicate the touch sensors are unlocked.

When no sensors are pressed for 10 seconds, the touch sensor lock will automatically be activated (except in CHRONOGRAPH mode and TIMER mode when the chronograph or timer is in use) and the touch sensors will be locked.

DISPLAY MODES:

The watch has five display modes:

NORMAL TIME, WORLD TIME (WT), ALARM (AL), CHRONOGRAPH (CR) and TIMER (TR).

To change from one display mode to another, press S3 sensor once.

NOTE: In any setting mode, when there is no sensor pressed for 30 seconds, the watch will automatically save

the entered data and exit the setting procedure.

TO SET THE TIME AND CALENDAR:

1.Press S3 sensor to select NORMAL TIME mode.

2.Press and hold S2 sensor, the message “HOLD TO SET” will be displayed for 2 seconds and the local city selection will blink. Press S1 or S2 sensor to cycle forward or backward through the 32 preset cities/ time zones to select your home city for display in

NORMAL TIME.

3.Press S3 sensor, the Daylight Savings Time (DST) setting will blink. Press S1 or S2 sensor to toggle between ON and OFF of the DST setting. Note that setting DST for NORMAL TIME does not auto- matically apply to the same city in WORLD TIME. You must apply DST to WORLD TIME cities separately.

4.Press S3 sensor, the hour digits will blink. Press S1 sensor to increase or S2 sensor to decrease the value. Holding down the sensor will speed up the process.

5.Press S3 sensor, the minute

digits will blink. Press S1 sensor to increase or S2 sensor to decrease the value. Holding down the sensor will speed up the process.

6.Press S3 sensor, the second digits will blink. Press S1 or S2 sensor to reset the second digits to zero.

7.Press S3 sensor, the year digits will blink. Press S1 sensor to increase or S2 sensor to decrease the value. Holding down the sensor will speed up the process.

8.Press S3 sensor, the month digits wil blink. Press S1 sensor to in- crease or S2 sensor to decrease the value. Holding down the sensor will speed up the process.

9.Press S3 sensor, the date digits will blink. Press S1 sensor to increase or S2 sensor to decrease the value. Holding down the sensor will speed up the process.

10.Press S3 sensor, the hour format setting will blink. Press S1 or S2 sensor to toggle between 12-hour and 24-hour format. The P.M. indi- cator will be displayed to indicate the time period 12:00 P.M. – 11:59 P.M. in 12-hour format.

11.Press S3 sensor, the ‘‘BEEP” setting will blink. The ‘‘BEEP” option will cause the watch to beep anytime a sensor or button is pressed. Press S1 or S2 sensor to toggle between ON and OFF for the beep setting.

12.Press S3 sensor, the hourly chime (CHIME) setting will blink.

Press S1 or S2 sensor to toggle between ON and OFF for the hourly chime setting.

13.When finished making all the set- tings, press and hold S3 sensor for approximately 3 seconds to confirm.

NOTE: The day (of the week) is automatically set in accordance with the date. The date can be set within

ENGLISH

the range of 1 January 2009 to 31 December 2099.

NOTE: The selected hour format will apply to both NORMAL TIME mode and WORLD TIME mode.

TO SELECT AND DISPLAY THE TIME OF WORLD TIME CITY IN WORLD TIME MODE:

1.Press S3 sensor to select WORLD TIME mode.

2.To make the world time city selec- tion, press S1 or S2 sensor to cycle forward or backward through the 32 preset cities / time zones.

3.Press and hold S1 sensor for ap- proximately 3 seconds to toggle between DST and Standard Time.

The DST indicator will be dis- played when Daylight Savings Time is displayed.

NOTE: When you have applied DST for individual cities / time zones, the re- spective time will be adjusted forward by 1 hour. Please make sure you have correctly applied DST for the selected local city and world time cities with reference to information available on the Internet, or else the watch will not be able to display the time of individual cities / time zones properly.

TO SET THE ALARM TIME:

1.Press S3 sensor to select ALARM mode.

2.Press and hold S2 sensor, the message “HOLD TO SET” will be displayed for approximately 2 seconds and the hour digits will blink. Press S1 sensor to increase or S2 sensor to decrease the value. Holding down the sensor will speed up the process.

3.Press S3 sensor, the minute digits will blink. Press S1 sensor to in- crease or S2 sensor to decrease the value. Holding down the sensor will speed up the process.

4.When finished making all the set- tings, press and hold S3 sensor for approximately 3 seconds to confirm.

NOTE: The alarm will automatically be activated after being set.

TO TURN ON/OFF THE ALARM:

In ALARM mode, press S1 sensor to toggle between ON and OFF of the alarm. When the alarm is ON, the alarm indicator will appear.

WHEN AN ALARM GOES OFF:

An alarm tune will be emitted at the designated time when the alarm is activated. To stop the tune, press any sensor or button.

TO USE THE CHRONOGRAPH:

1.Press S3 sensor to select CHRONO- GRAPH mode.

2.For the measurement of elapsed time in CHRONOGRAPH mode , press S1 sensor to start counting.

Image 1
Contents English To USE the Timer To SET the TimerWorld Time City Code Reference Table GMT City Other major cities Differential Code Same time zoneEspañol Para Usar EL Temporizador Cómo Configurar EL TEMPORI- ZadorCuadro DE Referencia DE Códigos DE Ciudades Deutsch TYO Tokyo PYONGYANG, Seoul UTCFrançais Reglage DU Minuteur WLG Wellington CHRISTCHURCH, Nadi ILE NauruUtilisation DU Minuteur Tableau DES Codes DE Reference Pour LES Villes DU MondeItaliano PER Usare IL Timer Come Impostare IL TimerCome Utilizzare LA RETROILLUMI- Nazione EL Tableau DES Codes DE Reference Pour LES Villes DU MondePortuguês Utilizar O Temporizador Utilizar a LUZ Posterior ELEC- TroluminescenteTabela DE Referência Código DE Cidade DE Horário Mundial MAL Time とWORLD Time モード設 S2センサを押さえると、HOLD toWorld TIMEモードで海外都市の時 ます。この中からNORMAL Time S3センサをタッチしてWORLDDEL PPGGUM NOU