JVC GVT0001-002A Presetting Stations, To Change the FM Reception Mode, Selecting a radio station

Page 15

Selecting a radio station ——————————————————————

❏Select a frequency by adjusting the MULTI CONTROL stick up or down. The frequency

changes in one step increments. “TUNED” appears on the display when a signal is found. This is called Manual Tuning.

The frequency increases when MULTI CONTROL stick is pressed upwards, and decreases when the MULTI CONTROL stick is pressed downwards.

❏If the MULTI CONTROL stick is pressed up or down continuously for a few seconds, the frequency changes continuously until a signal is found, then “TUNED” appears on the display. This is called Auto Tuning.

❏Possible only after presetting stations.

 

Using the Unit

 

Select a preset channel by adjusting the MULTI CONTROL stick left or right.

 

Using the Remote Control

 

1.

Press the TUNER button so that you can receive the most recent station tuned in.

TUNER

2.

Select the station by entering the preset number in the number keys of the Remote Control.

❏ Example: for channel 5, press 5. For channel 15, press +10 then 5. For channel 20, press +10, then 10. For channel 32, press +10 three times, then 2.

Presetting Stations

English

1

FM/AM

2

3

SET

4

5

SET

You can store up to 40 of your favorite radio stations (FM and AM) in memory, giving you quick, easy access to the stations.

Note: In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

1. Select a frequency band by pressing the FM/AM button.

2. Tune to a station by adjusting the MULTI CONTROL stick up or down.

3. Press the SET button .

On the display, “SET” will blink for 5 seconds.

❏During these 5 seconds while “SET” is blinking, you can assign a channel number to the station and enter it into the memory.

4.Select a preset number by adjusting the MULTI CONTROL stick left or right.

5.Press the SET button and the station will be assigned to the channel number showing on the display.

“MEMORY” appears in the display.

❏If a station has been previously stored using the same channel number, this will be erased and the newly selected station will be stored.

❏If “SET” in the display goes off, start again from step 3.

6.Repeat steps 1 - 5 for each station you want to store in memory with a preset number.

CAUTION: If the Unit is unplugged or if a power failure occurs, the preset stations will be erased after a few days. If this happens, preset the station again.

To Change the FM Reception Mode

 

When an FM stereo broadcast is hard to receive or noisy, press the FM MODE button on the Remote

 

Control so that the “AUTO” indicator goes off in the display. Reception improves, but there are no

FM MODE

stereo effects, In this monaural mode, noise comes out while tuning in stations (since muting is also

 

 

cancelled).

 

To restore the stereo effect, press the FM MODE button on the Remote Control so that the “AUTO”

 

indicator lights up. In this stereo mode, no noise comes out while tuning in stations, and you can

 

hear stereo sounds when a program is broadcast in stereo.

 

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents CA-D622T Mises en garde, précautions et indications diverses How This Manual Is Organized FeaturesTable of Contents Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlUsing an FM 75-Ohm Antenna Cable Not Supplied Connecting the FM AntennaConnecting the AM Antenna Using the Supplied Feeder AntennaRight speaker Connecting the SUB WooferConnecting a VCR Laying Out the UnitTo turn the Demo display on, press the Demo button Demo ModeAdjusting the Brightness of the Display On the Remote ControlTurning the CA-D622T Off Using the AmplifierTurning the Power On and Off Turning the CA-D622T OnFade Muting Function Adjusting the VolumeBass Mode Balance adjustmentSound Modes Customizing a sound mode Recording to a VCR Auto Power OffUsing a VCR Listening to a VCRDisplay Using the TunerTuning In a Station Switching between Frequency BandsSelecting a radio station Presetting StationsTo Change the FM Reception Mode Using the Remote ControlPROGRAM/RANDOM Using the CD PlayerCancel Disc indicatorPlace a CD, with its label side up, onto the tray Basics of Using the CD Player Continuous PlayPower comes on, and operations are done automatically To Insert DiscsTo Play a Disc ResumeTo Change Discs While Playing To Select a Passage Within a Track Programming the Playing Order of the TracksTo Select a Track To Select a Disc, Track Or Passage Within a TrackSelect a disc with the Disc buttons Select a disc with the Disc buttons 1 toDisc Track Step Number number number Press the Ü/8or CD buttonTo Modify the Program Mode displayRandom Play To Check the ProgramUnlocking the Electronic Lock Repeating a Selection or the DiscsTray Lock Function Locking the Electronic LockTape Using the Cassette Deck Listening to a TapeTape Direction Indicator on the Display Deck Control buttonsRegular Play One Touch PlayFast Left and Fast Right Music Scan Other Useful Features of the Cassette DeckMode off, or from off to on Reverse Mode onUsing the Cassette Deck Recording Things To Know Before You Start RecordingDubbing CD REC Start REC START/STOP Recording indicator light comes on Standard RecordingCheck the recording direction for the tape CD Direct Recording Dubbing REC CD REC Start 6. Press the CD REC Start button Auto Edit RecordingDISC- appears in the display Press the Disc button for the disc you want to recordDeck a and Deck B will start simultaneously How to Use the Dubbing ButtonTape to Tape Recording Dubbing Press the Dubbing buttonPress the TIMER/CLOCK button Using the TimersSetting the Clock Multi Control SET CancelSet the time you want the Unit to turn on Setting the Daily TimerProcedure For Setting the Daily Timer Press the TIMER/CLOCK button againTo use a CD as the source To use a Cassette Deck as the sourceTo use another source SET 7. Press the SET button Turning the Daily Timer On and OffSetting the Volume Level To change the Daily Timer settingSetting the REC Recording Timer To Change the Sleep Timer Setting Setting the Sleep TimerTurning the REC Timer On and Off To set the Sleep Timer, follow this procedureOFF Timer PriorityCare And Maintenance Possible Cause Action TroubleshootingSymptom No sound is heardSpecifications EN, FR JVC 0298HHMFLEJEM

GVT0001-002A specifications

The JVC GVT0001-002A is an innovative ultra-high-definition projector that delivers exceptional image quality and offers a range of features tailored for both home entertainment enthusiasts and professional applications. This projector is designed with a keen focus on delivering a truly immersive viewing experience, showcasing JVC's advanced technology and engineering excellence.

One of the standout features of the GVT0001-002A is its use of 4K D-ILA (Direct-Drive Image Light Amplifier) technology. This unique technology combines high brightness with remarkable contrast and color accuracy, resulting in stunning visuals that capture every detail of the content being displayed. The projector supports 4K resolution up to 3840 x 2160 pixels, providing a crisp and clear image that enhances the viewing experience for movies, sports, and gaming alike.

The GVT0001-002A incorporates a wide color gamut, allowing users to enjoy vibrant and lifelike colors that are true to the original source material. With HDR (High Dynamic Range) support, users can experience enhanced contrast and brightness, making shadows darker and highlights brighter, adding depth to the images presented. This feature is particularly beneficial for those who appreciate the cinematic experience in their own homes.

The projector also boasts a versatile connectivity option, including HDMI inputs, which support the latest HDMI standards and enable seamless integration with other devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, the GVT0001-002A is equipped with a powerful internal 10-watt speaker, providing adequate sound output without the need for external speakers in smaller rooms.

Another characteristic of this projector is its intelligent features, including an automated lens cover and lens shift capabilities. These allow for flexible installation and easy operation while ensuring the longevity of the device.

In terms of design, the GVT0001-002A embodies a sleek and modern aesthetic, making it an attractive addition to any room. The compact form factor combines functionality with style, ensuring it seamlessly integrates into various home or office environments.

Overall, the JVC GVT0001-002A is an impressive ultra-high-definition projector that combines cutting-edge technologies with user-friendly features, making it a compelling choice for anyone seeking high-performance projection solutions. Its remarkable image quality, versatility, and advanced functionalities set it apart, providing a premium viewing experience that is sure to captivate audiences.
Top Page Image Contents