JVC GVT0001-002A manual Troubleshooting, Symptom, No sound is heard, Possible Cause Action

Page 39

Troubleshooting

•If you are having a problem with your CA-D622T, check this list for a possible solution before calling for service.

•If you cannot solve the problem from the hints given here, or the Unit has been physically damaged, call a qualified person, such as your dealer, for service.

English

Symptom

No sound is heard.

Possible Cause

 

Action

Connections are incorrect, or loose.

 

Check all connections and make

 

 

corrections. (See pages 4 - 5.)

 

 

 

Unable to record.

Poor radio reception

The CD skips.

Unable to operate the Remote Control.

The CD tray cannot be opened.

Cassette record protect tabs are removed.

•The antenna is disconnected.

•The AM Loop Antenna is too close to the Unit.

•The FM Wire Antenna is not properly extended and positioned.

The CD is dirty or scratched.

•The path between the Remote Control and the sensor on the Unit is blocked.

•The batteries have lost their charge.

The main AC power cord is not plugged in.

Cover holes on back edge of cassette with tape.

•Re-connect the antenna securely.

•Change the position and direction of the AM Loop Antenna.

•Extend FM Wire Antenna to the best reception position.

Clean or replace the CD.

•Remove the obstruction.

•Replace the batteries. Plug in the AC power plug.

The CD does not play.

Operations are disabled.

The cassette door cannot be opened.

The CD is upside down.

The built-in microprocessor has malfunctioned due to external electrical interference.

During tape playing, the power cord was unplugged.

Put the CD in with the label side up.

Unplug the Unit then plug it back in.

Plug in the power cord, press the POWER button, and then the 0 button.

37

Page 38 Page 40
Image 39
Page 38 Page 40
Contents CA-D622T Mises en garde, précautions et indications diverses How This Manual Is Organized FeaturesTable of Contents Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlUsing an FM 75-Ohm Antenna Cable Not Supplied Connecting the FM AntennaConnecting the AM Antenna Using the Supplied Feeder AntennaRight speaker Connecting the SUB WooferConnecting a VCR Laying Out the UnitTo turn the Demo display on, press the Demo button Demo ModeAdjusting the Brightness of the Display On the Remote ControlTurning the CA-D622T Off Using the AmplifierTurning the Power On and Off Turning the CA-D622T OnFade Muting Function Adjusting the VolumeBass Mode Balance adjustmentSound Modes Customizing a sound mode Recording to a VCR Auto Power OffUsing a VCR Listening to a VCRDisplay Using the TunerTuning In a Station Switching between Frequency BandsSelecting a radio station Presetting StationsTo Change the FM Reception Mode Using the Remote ControlPROGRAM/RANDOM Using the CD PlayerCancel Disc indicatorPlace a CD, with its label side up, onto the tray Basics of Using the CD Player Continuous PlayPower comes on, and operations are done automatically To Insert DiscsTo Play a Disc ResumeTo Change Discs While Playing To Select a Passage Within a Track Programming the Playing Order of the TracksTo Select a Track To Select a Disc, Track Or Passage Within a TrackSelect a disc with the Disc buttons Select a disc with the Disc buttons 1 toDisc Track Step Number number number Press the Ü/8or CD buttonTo Modify the Program Mode displayRandom Play To Check the ProgramUnlocking the Electronic Lock Repeating a Selection or the DiscsTray Lock Function Locking the Electronic LockTape Using the Cassette Deck Listening to a TapeTape Direction Indicator on the Display Deck Control buttonsRegular Play One Touch PlayFast Left and Fast Right Music Scan Other Useful Features of the Cassette DeckMode off, or from off to on Reverse Mode onUsing the Cassette Deck Recording Things To Know Before You Start RecordingDubbing CD REC Start REC START/STOP Recording indicator light comes on Standard RecordingCheck the recording direction for the tape CD Direct Recording Dubbing REC CD REC Start 6. Press the CD REC Start button Auto Edit RecordingDISC- appears in the display Press the Disc button for the disc you want to recordDeck a and Deck B will start simultaneously How to Use the Dubbing ButtonTape to Tape Recording Dubbing Press the Dubbing buttonPress the TIMER/CLOCK button Using the TimersSetting the Clock Multi Control SET CancelSet the time you want the Unit to turn on Setting the Daily TimerProcedure For Setting the Daily Timer Press the TIMER/CLOCK button againTo use a CD as the source To use a Cassette Deck as the sourceTo use another source SET 7. Press the SET button Turning the Daily Timer On and OffSetting the Volume Level To change the Daily Timer settingSetting the REC Recording Timer To Change the Sleep Timer Setting Setting the Sleep TimerTurning the REC Timer On and Off To set the Sleep Timer, follow this procedureOFF Timer PriorityCare And Maintenance Possible Cause Action TroubleshootingSymptom No sound is heardSpecifications EN, FR JVC 0298HHMFLEJEM

GVT0001-002A specifications

The JVC GVT0001-002A is an innovative ultra-high-definition projector that delivers exceptional image quality and offers a range of features tailored for both home entertainment enthusiasts and professional applications. This projector is designed with a keen focus on delivering a truly immersive viewing experience, showcasing JVC's advanced technology and engineering excellence.

One of the standout features of the GVT0001-002A is its use of 4K D-ILA (Direct-Drive Image Light Amplifier) technology. This unique technology combines high brightness with remarkable contrast and color accuracy, resulting in stunning visuals that capture every detail of the content being displayed. The projector supports 4K resolution up to 3840 x 2160 pixels, providing a crisp and clear image that enhances the viewing experience for movies, sports, and gaming alike.

The GVT0001-002A incorporates a wide color gamut, allowing users to enjoy vibrant and lifelike colors that are true to the original source material. With HDR (High Dynamic Range) support, users can experience enhanced contrast and brightness, making shadows darker and highlights brighter, adding depth to the images presented. This feature is particularly beneficial for those who appreciate the cinematic experience in their own homes.

The projector also boasts a versatile connectivity option, including HDMI inputs, which support the latest HDMI standards and enable seamless integration with other devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, the GVT0001-002A is equipped with a powerful internal 10-watt speaker, providing adequate sound output without the need for external speakers in smaller rooms.

Another characteristic of this projector is its intelligent features, including an automated lens cover and lens shift capabilities. These allow for flexible installation and easy operation while ensuring the longevity of the device.

In terms of design, the GVT0001-002A embodies a sleek and modern aesthetic, making it an attractive addition to any room. The compact form factor combines functionality with style, ensuring it seamlessly integrates into various home or office environments.

Overall, the JVC GVT0001-002A is an impressive ultra-high-definition projector that combines cutting-edge technologies with user-friendly features, making it a compelling choice for anyone seeking high-performance projection solutions. Its remarkable image quality, versatility, and advanced functionalities set it apart, providing a premium viewing experience that is sure to captivate audiences.
Top Page Image Contents