Your RadioShack Compact Ni-Cd (nickel cadmium)/Ni-MH (nickel metal hydride) Bat- tery Charger is designed to charge two or four batteries — AA and AAA types.
Its features include:
Two Charging Indicators — an indicator lights during charging for each battery type (Ni-Cd or Ni-MH), and turns off when charg- ing is complete.
Reverse Polarity Protection — protects the charger and batteries against damage from incorrectly installed batteries.
Automatic Timer Shut-Off — turns off the charger to prevent overcharging the batter- ies.
OPERATION
1.To charge two Ni-Cd or Ni-MH AA bat- teries, install both into BAY 1 as indi- cated by the polarity symbols (+ and –) marked inside the compartment, then slide Ni-Cd/Ni-MHto the appropriate set- ting.
Note: Both batteries must be installed in the same bay.
To charge two Ni-Cd or Ni-MH AAA bat- teries, install both into the supplied AAA battery adapter as indicated by the polarity symbols (+ and –) marked on the adapter. Then install the battery adapter into BAY 1 with the battery con- tacts facing the top of the bay and the arrow marked on the adapter pointing
toward the back of the charge bay and set Ni-Cd/Ni-MHto the appropriate set- ting.
Ni-Cd/
Ni-MH
Switch
AAA
Adapter
2.To charge four Ni-Cd or Ni-MH AA bat- teries, install two batteries into each bay as indicated by the polarity symbols (+ and –) marked inside each compart- ment, then slide Ni-Cd/Ni-MHto the appropriate setting.
To charge four Ni-Cd or Ni-MH AAA bat- teries, install four batteries into the two supplied AAA battery adapters as indi- cated by the polarity symbols (+ and –) marked on the adapters. Then install an adapter into each bay with the battery contacts facing the top of the bay and the arrows marked on the adapters pointing toward the back of the charge bay, and slide Ni-Cd/Ni-MHto the appro- priate setting.
Cautions:
