Canon Guide to Performing Automatic Density Correction on IR2200 Copier

CHAPTER 5 SERVICE MODE

COPIER>FUNCTION>DENS

PD-ME

Use it to execute automatic density correction for text mode (to read PD- DENS output).

Using the Mode

1)While keeping the following in mind, place the PD-DENS output on the copyboard glass as indicated:

• The printed side must face down.

• The whiter side (lighter; of the 17 gradations) must face the vertical size plate.

• The output must be placed in relation to the index in the left rear of the copyboard glass.

2)Select <PD-ME> to highlight, and press the OK key.

3)The scanning lamp goes ON and OFF 13 times, making as many scans automatically.

• If ‘OK’ is indicated, end the work.

• If ‘NG’ is indicated, discussed under “Standards and Adjustments” in Chapter 3.

Place it so that the printed side faces down.

PD-DENS output

F05-501-06

5-68 T COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001