Canon IR3300 E501, E505, E510, Saddle Finisher-G1 Error Codes, Error Code of the Finisher Unit

CHAPTER 6 SELF DIAGNOSIS

1.3 Saddle Finisher-G1 Error Codes

When the finisher’s self diagnostic mechanism has gone ON, it may be reset by turning off and then on its host machine.

The host machine can still generate copies if the finisher cable is disconnected and the de- livery path is set to the delivery tray of the host machine.

1.3.1 Error Code of the Finisher Unit

E501

0001	The communication between the finisher controller PCB and the puncher
	drive PCB is disrupted.
Main cause	The finisher controller PCB is faulty. The puncher drive PCB is faulty.

E505

0001	When the main power is turned on, the checksum of the finisher controller
	PCB has a fault.
0002	When the main power is turned on, the checksum of the puncher driverPCB
	has a fault.
Main cause	The EEPROM is faulty. The finisher controller PCB is faulty. The puncher
	driver PCB is faulty.

E510

0001	The feeding roller does not leave home position when the feed motor is
	driven for 2 sec.
0002	The feeding roller does not return to home position when the feed motor is
	driven for 2 sec.
Main cause	The feed motor (M1) is faulty. The setting roller home position sensor is
	faulty. The finisher controller PCB is faulty.

6-38 T COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001