CHAPTER 5 SERVICE MODE

COPIER>ADJUST>CST-ADJ

MF-A4

Range of adjustment

Use it to enter the paper width basic value for the multifeeder tray (A4).

0 to 1024

COPIER>ADJUST>FIXING

<FIXING>

Use it to make fixing-relating adjustments.

If you have cleared the RAM on the DC controller PCB and replaced the PCB, be sure to enter the settings indicated on the service label.

FX-FL-TH

 

 

Use it to enter the fine-adjusted value for the fixing film speed for thick pa-

 

per.

 

• Use it to make fine-adjustments in relation to the target control speed of

 

the fixing film when thick paper is selected.

Range of

-3 to +3 (in msec; default: 0)

adjustment

 

 

 

FX-FL-SP

 

 

Use it to enter the fine adjustment value for the fixing film when plain pa-

 

per is selected.

 

• Use it to fine-adjust the target control speed for the fixing film when

 

plain paper is selected.

Range of

-3 to +3 (in msec; default: 0)

adjustment

 

 

 

COPYRIGHT © 2001 CANON INC.

CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001

5-55 T

Page 569
Image 569
Canon IR2200, IR3300, IR2800 manual Fixing, MF-A4, Fx-Fl-Th, Fx-Fl-Sp