Canon IR3300, IR2800, IR2200 manual E110, 14 T

CHAPTER 6 SELF DIAGNOSIS

E110

0000	The motor ready signal does not arrive within 15 sec after the laser scanner
	motor drive signal is generated.
Main cause	The wiring is faulty (short circuit, open circuit, disconnection). The laser
	scanner motor (M10) is faulty. The main power supply PCB is faulty. The
	DC controller PCB is faulty.

Action

1. Connector

Are the connector (J312) on the DC controller PCB and the relay connector connected securely?

NO: Connect the connectors securely.

2. Main power supply PCB

During printing, does the voltage between J204-1 (+) and J204-2 (-) on the main power supply PCB change from 0 to about 24 V?

NO: Replace the main power supply PCB.

3. Laser scanner unit, DC controller PCB

Try replacing the laser scanner unit. Is the problem corrected? YES: End.

NO: Replace the DC controller PCB.

6-14 T COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001