Canon IR2200, IR3300, IR2800 manual Try-Stp, 88 T

CHAPTER 5 SERVICE MODE

	COPIER>OPTION>USER
TRY-STP
	Use it to impose a limit to the number of sheets for stapling in the finisher
	and to suspend printing if sizes are mixed.
Caution	If ‘1’ is set, occurrence of jams and alignment will be outside the consider-
	ation.
Settings	0: normal mode (suspend printing if limit to number/mixed sizes is de-
	tected); default
	1: suspend when height sensor goes ON (paper full)
MF-LG-ST
	Use it to indicate the Extra Length key for paper up to 630 mm long
	(multifeeder, free; the ADF will also accommodate paper up to 630 mm
	long).
Settings	0: normal mode (default), 1: extra length mode (key indicated)
SPECK-DP
	Use it to enable or disable a warning for the result of dust detection in
	stream reading mode.
Settings	0: disable indication (default), 1: enable indication
CNT-DISP
	Use it to enable or disable the indication of the serial number in response to
	a press on the Counter Check key.
Settings	0: enable (default), 1: disable
PH-D-SEL
	Use it to select the number of lines for printing in photo mode.
Settings	0: 141 lines (default), 1: 134 lines
COPY-JOB
	Use it to enable or disable the use of a copy job auto start when the coin ro-
	bot/ card reader is used.
Settings	0: enable copy job auto start (default)
	1: disable copy job auto start
OP-SZ-DT
	Use it to enable or disable original size detection in book mode.
Settings	0: disable (original size entered from control panel; default)
	1: enable (original size detected automatically)
NW-SCAN
	Use it to enable or disable the network scan function.
Settings	0: disable (default), 1: enable

5-88 T COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001