Canon IR2200, IR3300, IR2800 manual Registration Roller Assembly, Removing the Registration Roller

CHAPTER 5 PICK-UP/FEEDING SYSTEM

9.4 Registration Roller Assembly

9.4.1 Removing the Registration Roller

1)	Remove the front inside cover (6	[1]
	screws).
2)	Remove the controller box unit. (p. 7-
	19P)
3)	Remove the two screws [1] each (front,
	rear), and detach the front cover switch	[2]
	[2] and the harness guide [3].

Take care not to damage the belt [4].

[1]

[3]

[1]

[4]

4)Disconnect the connector [1].

5)Remove the screws [2], and detach the terminal [3].

6)Remove the spring [4].

7)Remove the spring [1] from the front.

8)Remove the stepped screw [2], and de- tach the developing assembly base [3].

F05-904-01

[2] [3]

[1]

[4]

F05-904-02

[3]

[1]

[2]

F05-904-03

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 5-51 P