Canon IR2200, IR3300, IR2800 manual Copierfunctionmf- Adj, Copierfunctiondk ADJ-Y, F03-103-04

CHAPTER 3 STANDARDS AND ADJUSTMENTS

1.3.2 Adjusting the Registration for the Multifeeder Rear Front

Try the following service mode first; if not corrected, perform the adjustments that follow:

COPIER>FUNCTION>MF- ADJ

1) Open the multifeeder tray.

2) Loosen the two screws [1], and move the side guide plate unit [2] back and forth to adjust.

[1][2][1]

F03-103-03
1.3.3 Adjusting the Registration for the Deck
Try the following service mode	[3]	[2]
[1]
first; if not corrected, perform
the adjustments that follow:
COPIER>FUNCTION>DK-
ADJ-Y

1) Slide out the compartment.

2) Using the two screws [2], change the position of the latch plate [1] of the deck open solenoid (SL2D) found at the left rear. (At this time, use the index [3] on the latch plate as a reference.)

F03-103-04

3)Close the compartment, and check to make sure that the gap of the front cover is 3 ±1 mm.

4)If the gap is not 3 ±1 mm, adjust the front cover.

3-4 T COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001