Canon IR3300, IR2800, IR2200 manual Decrl-Fn, Tr-Cln, Fan-Extn, Copy-Lim, Sleep, Size-Det, COUNTER1

CHAPTER 5 SERVICE MODE

	COPIER>OPTION>BODY
DECRL-FN
	Use it to enable or disable delivery curl reducing fan.
Settings	0: disable (default)
	1: enable
Caution	When ‘1’ is selected, the curl reducing fan is rotated for 30 sec after the im-
	age leading edge sensor goes ON.
TR-CLN
	Use it to enable or disable transfer charging roller cleaning enhancement
	mode.
Settings	0: disable (default)
	1: enable
Caution	Make sure that the transfer output between sheets for single-sided printing
	is set to cleaning bias output.
FAN-EXTN
	Use it to enable or disable the fan extension mode at the end of a job.
Settings	0: disable (default)
	1: enable
Caution	Use it to drive all fans for 5 min after the end of a print job received in sleep
	mode.
	COPIER>OPTION>USER

USER

Making user-related settings

COPY-LIM
	Use it to change the upper limit imposed on the number of copies.
Settings	1 to 999 copies (default: 999)
SLEEP
	Use it to enable or disable sleep mode.
Settings	0: enable (default), 1: disable
SIZE-DET
	Use it to enable or disable the original size detection function.
Settings	0: enable (default), 1: disable
Caution	After making a selection, be user to turn off and then on the main power
	switch.
COUNTER1
	Use it to indicate the type of software counter 1 of the control panel.
Caution	The type of soft counter 1 cannot be changed.
Settings	101: total 1 (default: fixed to 101) (T05-601-01)

5-86 T COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001