Canon IR2200, IR3300, IR2800 manual Develop, De-Dc, De-Ofst

CHAPTER 5 SERVICE MODE

COPIER>ADJUST>DEVELOP

<DEVELOP>

Use it to adjust the developing bias output.

DE-DC
	Use it to enter the adjustment value for the DC component of the develop-
	ing bias within the image area.
Range of	0 to 255 (a higher setting generates lighter images)
adjustment
Caution	If you have replaced the DC controller PCB, be sure to enter the settings
	indicated on the service label.
DE-OFST
	Use it to enter the offset value for the DC component of the developing
	bias.
Range of	0 to 255 (a higher setting generates lighter images)
adjustment
Caution	• be sure to keep the setting between +30 and -30.
	• If you have replaced the composite power supply PCB, be sure to enter
	the settings indicated on the label attached to the new PCB (case).

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 5-49 T