Refrigerator Operation
Setting the Controls (continued)
Setting the Temperature Scale
The indicator light, next to the C° button, is lit when the temperature scale for the freezer and refrigerator displays is set to Celsius. To change the displays to Celsius (or back to Fahrenheit), press the C° button.
Celsius Indicator Light
Adjusting the Temperature Setting
NOTE: Wait at least 24 hours between adjustments.
To adjust the temperature setting:
Press the refrigerator or freezer UP () or DOWN () key until the desired temperature is reached.
NOTE: The adjustable temperature range for the freezer is
Use the table below for guidance if you need to change the temperature.
CONDITION/ | TEMPERATURE |
REASON: | ADJUSTMENT: |
REFRIGERATOR too cold | REFRIGERATOR Control 1° |
Not set correctly for conditions | higher |
REFRIGERATOR too warm | REFRIGERATOR Control 1° lower |
High use or room very warm |
|
FREEZER too cold | FREEZER Control 1° higher |
Not set correctly for conditions |
|
FREEZER too warm/too little ice. | FREEZER Control 1° lower |
High use or heavy ice use |
|
Water Filter Monitor
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.
The water filter monitor will help you know when it is time to change your filter. To change the filter, see the Replacing the Water Filter on page 14.
DISPLAY READING: | STATUS: |
99 percent | New filter installed |
10 percent | Order replacement filter |
0 percent or flow decreases | Replace filter |
A new water filter should display
a reading of 99%. The reading in the display will decrease as the
filter life is used. When the display
reads 10%, it is time to order a replacement water filter. It is recommended that you replace the
filter when the filter display changes
to 0% OR when water flow to your water dispenser or ice maker
decreases noticeably. See Replacing the Water Filter on page 14.
After replacing the water filter, press RESET and hold for 2 seconds to change the water filter display to 99 percent.
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full grocery loads or temporarily warm room temperatures.
Press the MAX COOL key to turn on the Max Cool feature. The Max Cool indicator light will remain on for 24 hours unless manually turned off.
NOTE: The refrigerator temperature display will remain at 34°F (1°C) and the freezer temperature display will remain at
Max Cool
Indicator Light
6