Before Use
Remove the Packaging
If the ice storage bin is located on the door, remove the temporary shield from underneath the ice storage bin. See Ice Maker and Storage Bin.
Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol, flammable fluids or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see Important Safety Instructions on page 1.
Dispose of/recycle all packaging materials.
Clean Before Using
After you remove all of the packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in Care and Cleaning.
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small,
Refrigerator Operation
Turning the Main Power Switch On/Off
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
If you need to turn the power to your refrigerator on or off, you must remove the top grille assembly to access the power switch. Turn the power to the refrigerator off when cleaning your refrigerator or changing light bulbs.
Removing the Top Grille
1.Grasp both ends of the top grille.
2.Push the top grille straight up, then pull straight out. Lay the grille on a soft surface.
BAB
A. Top grille
B. Cabinet side trim
Replacing the Top Grille
1.Insert the top grille hooks (located on the back of the top grille) into the slots on the side trim.
2.Pull the grille down slightly to lock into place.
To Turn the Main Power Switch On or Off:
1.Remove the top grille.
2.Press the main power switch to the ON or OFF position.
3.Replace the top grille.
IMPORTANT: Be sure the main |
|
power switch is set to the On |
|
position after cleaning refrigerator or |
|
changing light bulbs. | A |
A. Power switch
3