Canon IR2800 Adjusting the Paper Level Indicator, Adjusting the Position of the Support Member

CHAPTER 3 STANDARDS AND ADJUSTMENTS

5.2 Adjusting the Paper Level Indicator

1) Move the drive belt [2] of the paper

level indicator behind the front cover[1] [1] by hand so that the white area inside

the window [3] increases, i.e., in the di- rection for the arrow [4]; move it until a

[3]

[2]

little resistance is felt.

[4]

F03-502-01

5.3 Adjusting the Position of the Support Member

If the compartment cannot be opened/ closed smoothly and the position of the sup- port roller must be adjusted, perform the following:

1)Remove the front cover.

2)Using the four screws [4] of the roller

support plate [3], make adjustments so		[5]
that the support roller [1] and the floor
[2] is about 3 mm when the compart-
ment is fully slid out. (At this time, use
the scale [5] on the front side plate as a	[4]	[4]
reference.)

[3]	A
[1]	[2]

F03-503-01

3-18 T COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001