COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
5-3 T
1.3 Ending Service Mode
• Press the Reset key once to return to the Service Mode Initial screen (F05-101-03).
• Press the Reset key twice to end service mode and return to the User screen (standard).
If you have used service mode (ADJUST, FUNCTION, OPTION), be sure
to turn off and then on the main power switch after ending service mode.
1.4 Backing Up Service Mode
At the factory, each machine is adjusted, and its adjustment settings are recorded on the
service label [1] (inside the service book case behind the front cover).
If you have cleared the RAM and replaed the PCB, the settings under ADJUST and OP-
TION will all return to the factory settings. Be sure to enter the settings indicated on the ser-
vice label. You can print out the settings stored in the machine in service mode:
COPIER>FUNCTION>MISC-P>P-PRINT. In addition, you can obtain a new service label
using service mode: COPIER>FUNCTION>MISC-P>LBL-PRINT.
F05-104-01

[1]